Inverter Skid & BESS Access Platforms for Utility-Scale Solar

Pre-engineered aluminum platforms, stairs and crossovers for MV skids, central inverters, BESS containers and substations.

Designed to OSHA 1910.28/1910.29, with working clearance for NEC 110.26. One repeatable access package per power block, from install through decades of O&M.

Safe Access for Solar, BESS & Substation Sites

From central inverters and MV skids to BESS containers, switchgear and step-up transformers, energy sites are full of equipment that crews need to reach safely and often. SafeSmart’s pre-engineered aluminum platforms, stairs and crossovers give O&M teams a stable work surface with guardrails, designed to OSHA 1910.28/1910.29. That keeps maintenance on schedule and equipment protected for the life of the site.

 

Solar Inverters

Provide safe, repeatable access to inverters, transformers, and electrical equipment distributed across large-scale solar installations.

Substations

Create protected maintenance access around switchgear, transformers, and elevated equipment within complex substation environments.

Battery Storage

Deliver safe access to containerized battery systems and supporting electrical equipment for inspections and routine maintenance activities.

Switchyards

Establish secure pathways and work platforms around energized equipment, control systems, and utility infrastructure.

Equipment

Support maintenance and operational access around generation equipment, process systems, and elevated work areas.

Infrastructure

Provide adaptable access solutions for electrical equipment, control systems, and maintenance activities across utility networks.

Countless Solutions. Endless Possibilities.

From inverter platforms and BESS station cable tray access to generator systems and AdaptaStep™ crossovers, every energy facility presents unique access requirements. Explore a selection of pre-engineered configurations designed to improve safety, simplify maintenance, and support efficient access across today’s energy infrastructure.

Aluminum skid-clamp inverter platform mounted to an MV skid, with guardrails and stair access.

Inverter Skids | MV Skids | Medium-Voltage Power Stations

Skid-Clamp Inverter Platform for MV Skids

Rapid Deployment

Clamps directly to existing inverter and MV skids, with no new foundations or extensive site modifications. Fit it during construction or retrofit it on an operating site.

Safe, Repeatable O&M Access

A dedicated, guarded work area at the PCS, LV cabinet and MV transformer. Technicians inspect and service from a stable platform, not ladders or uneven ground.

Worker beside a raised inverter skid on an eroded dirt berm at a utility-scale solar site.

A Better Way to Access Inverters

Still Using Dirt Berm Access?

Berms look cheaper on day one. On flood-zone sites and raised skids, the ongoing cost adds up fast.

  1. Erosion & Settlement

    Washout undermines skids and leaves uneven footing in front of the equipment.

  2. Repeated Regrading

    Rebuilding berms after every storm adds recurring site work and O&M cost.

  3. Delayed Maintenance

    Mud, ruts and soft ground interrupt service access and extend inverter downtime.

  4. Skids & Cables at Risk

    Soil movement can expose MV collection cable, DC cable and conduit.

  5. Flood-Zone Sites & Raised Skids

    When skids are raised to FEMA base flood elevation or design flood elevation, berms grow taller, wider and harder to maintain. A platform reaches the raised skid without the fill.

There’s A Better Way™

Engineered Inverter Access

A Platform for Any Inverter or MV Skid.

SafeSmart configures access around your inverter model, service clearances and site conditions. From installation and commissioning through decades of O&M, crews have safe footing for IGBT and power module replacement, filter changes, thermographic inspection and routine servicing. SafeSmart platforms are in service on Sungrow, TMEIC and Ingeteam power stations.

Freestanding multi-bay wraparound inverter platform with connected service areas and multiple stair approaches.

Freestanding Multi-Bay Wraparound

Continuous access across extended inverter lineups and multi-bay power stations.

Three-point skid-mounted inverter platform on an MV skid, with separate service platforms and stairs.

Three-Point Skid-Mounted

Targeted platforms on the MV skid, placed at each defined service interface.

Freestanding wraparound inverter platform with connected walkways and guarded stair access.

Freestanding Wraparound

Connected service access around the power station, independent of the skid.

Explore the System

Designed Around the Work.

A platform needs to do more than reach the right height. SafeSmart plans access around how technicians inspect, service and maintain the station, and around the codes that govern work near energized equipment.

  • Room to Open, Inspect & Service

    Working areas account for enclosure doors, removable panels and controls, with NEC 110.26 working clearance in front of electrical panels and room to work in arc-flash PPE.

  • Guardrails & Stairs Designed to OSHA

    Guardrails designed to OSHA 1910.28/1910.29 and stairs with uniform riser heights give crews consistent footing on every approach.

  • Access Above. Clearance Below.

    Open framing preserves access beneath the platform for cabling, combiner boxes, inspection and maintenance.

  • Plan for Equipment Removal

    Modular assemblies can be removed or repositioned for IGBT module swaps, transformer service or full inverter replacement.

Configure a platform for your Sungrow, TMEIC, Ingeteam or other inverter station. Share your inverter model, MV skid drawings, service clearances and site layout with a SafeSmart access specialist.

SafeSmart aluminum BESS cable tray crossover platform with adjustable support legs.

Battery Energy Storage | BESS Containers | Cable Tray Crossings

BESS Cable Tray Crossovers & Access Platforms

Give crews a dedicated route over cable trays and a safe place to work along battery containers and BESS enclosures. SafeSmart aluminum crossover platforms keep foot traffic off DC and MV collection cable, while preserving access for commissioning, inspection, HVAC service and PCS maintenance in every power block.

Protect Cable Infrastructure

Span DC and MV collection cable trays without using cables or tray covers as a walking surface.

Maintain Door Access

Configure the deck around battery container door swing, HVAC units, service points and required working clearances.

Modular Spans & Widths

Spans and widths match cable tray dimensions and container spacing per power block, so one standard detail repeats across the whole site.

Adjustable Support Legs

Set the platform height to clear cable trays and conduit, and to suit varying ground elevations across each DC block.

Replace Site-Built Wood

Modular AdaptaStep™ aluminum components replace site-built wood that rots, warps and needs constant repair.

Optional Ground Anchoring

Anchor platforms where required, with the fixing arrangement selected for the ground surface and project requirements.

SafeSmart aluminum cable tray crossover between battery containers at a BESS facility.
A Dedicated Cable Tray Crossing Keep foot traffic above DC and MV collection cable between battery containers.
BESS enclosure door access from a SafeSmart cable tray crossover platform.
Clear Access to BESS Enclosure Doors Position the platform around door swing, HVAC units and service areas.

Configure a Crossover for Your BESS Site.

Share your cable tray dimensions, container layout per power block, door clearances and ground conditions with a SafeSmart specialist to plan a repeatable crossover detail for the whole project.

View Product →
Pre-engineered modular aluminum equipment platform with red handrails and stair access for utility-scale energy equipment.

EPCs | Utility-Scale Solar | BESS | Substations | Generators

Pre-Engineered
Equipment Platforms

One Standard Detail per Power Block

A repeatable, pre-engineered access package for every inverter or BESS block. Approve the detail once, then install it across the whole site.

Fewer RFIs. Faster Approvals.

Standard engineered details cut RFIs and approval cycles, keeping cost and schedule predictable through COD.

Built for 250 MW+ Projects

Scales to 250 MW+ sites with 40+ inverter blocks, using the same AdaptaStep™ components on every block for consistent install and simpler procurement.

Integrated Structural T-Slot System

Patented structural T-slot extrusions let handrails, stairs and accessories connect anywhere along the platform without drilling into the frame.

Fewer Supports. More Usable Workspace.

Engineered aluminum extrusions span long distances with fewer legs, leaving clear maintenance areas around transformers, switchgear, generators and cable runs.

Adapt Your Existing Investment

Extend or reconfigure with the same modular components as equipment changes, sites expand or projects are repowered.

AdaptaStep aluminum crossover platform over conduit and cable trench at a substation, with stairs and red handrails.

Substations | Switchyards | Cable & Conduit Crossings

AdaptaStep™ Crossovers & Platforms

Cross Conduit, Trenches & Piping

Create defined pathways over cable trenches, conduit, piping and equipment pads, connecting work areas around energized equipment in substations and switchyards.

Bolt-Together Installation

Modular platforms, stairs and guardrails bolt together with no welding or hot work on site, and reconfigure as switchyard and substation layouts change.

Elevated aluminum generator access platform with stairs, support bracing and red guardrails.

Generators | Backup Power | Auxiliary Equipment

Generator Access Platforms

Modular by Design

Configure platforms, stairs and guardrails around generator dimensions, service points, control panels and the working space needed for maintenance.

Engineered for Elevated Access

Support legs and structural bracing create an elevated work area alongside generators and enclosures, with stair access and guarded walking surfaces.

SolarStairs aluminum inverter access stairs with self-leveling treads and red handrails.

Solar Inverter Access | MV Skids | Raised Equipment Pads

The Original SolarStairs™

Designed for Inverters

Repeatable stair access to central and string inverters, MV skids and raised equipment pads, replacing ladders and site-built steps.

Installs in Minutes

Ships fully assembled for fast installation with minimal labor and no on-site fabrication, block after block.

Adapts to Uneven Ground

Articulating stairs and self-leveling treads follow changing grades and settling soil, keeping stepping surfaces level.

Built for Outdoor Use

Corrosion-resistant aluminum stands up to sun, rain and dust on utility-scale solar sites, with no rot or rust to maintain.

Engineered Access for Energy Infrastructure

Let’s Plan Access for Your Energy Site.

Need inverter platforms, BESS cable tray crossovers, or access to generators and other equipment? Share your equipment layout, dimensions, and site requirements. A SafeSmart specialist will help you find the right configuration.

Need Assistance?

Talk with Our Access Specialists

Our team works with project stakeholders to evaluate access challenges and help identify the safest, most effective solution for your site. Whether you’re planning ahead or working through active conditions, we’re here to support the process.

Talk to a Specialist →
  • Speak directly with an access specialist
  • Guidance tailored to your site and requirements
  • Support across systems and configurations
  • Help navigating complex applications